SAME FAULT. TWO ENDINGS.
The difference is four minutes.
A probe out of range. A panel failure. A compressor stall. Aviot detects and calls. You act. The facility stays intact.
Your phone rings.
- Up to 128 rooms
- 3-year warranty
- Alert < 30 s
- 3-4 h install
In three words
What Aviot does In three words.
- 01
Detects.
Probes measure every room. CO₂, temperature, humidity, pressure, panel contacts. If anything drifts out of range — your range — you know in under 30 seconds.
- 02
Calls.
Aviot calls your phone. If you do not pick up, it calls the next on the list. Until someone presses 1 and says "I am on it". Meanwhile SMS, email and push too.
- 03
Records.
Every incident, every call, every reading. Exportable history for sanitary, ISO or HACCP audits. Nobody gets to say "I did not know".
"The first time it called me at 4 a.m. I thought what a pain. The second time, when it saved me a batch, it stopped being a pain."
ONLINE
IP54 · DIN
Aviot30 hardware
Built for harsh environments
In-house board with temperature, humidity and CO₂ probes. Digital and analog inputs for extra probes, voltage-free contacts and electrical panel signals. Multi-operator IoT with Wi-Fi backup and lithium battery.
- Up to 128 rooms
- 7 contacts per building
- Internal lithium battery
- Multi-operator IoT
iOS and Android app
Watch your facility from your phone
Four taps and you know what is happening in every room. Every probe, every panel contact, every incident. Full history for audit.
-
Your devices
See the status of every installed Aviot30 and the latest probe readings.
-
Site map
Geolocated rooms with color pins by state: OK, warning or alarm.
-
Per-room detail
Temperature, humidity, CO₂, NH₃ and panel contacts in real time.
-
Set thresholds
Tune ranges per probe and which roles receive each alarm.
- Get a quote
How it works
How it works
Professional install in 3-4 hours and ready to watch 24/7.
-
We install
A qualified technician wires the Aviot30 board to your panel and probes. 3-4 h on site.
-
You configure
Set thresholds for temperature, humidity, CO₂ and panel contacts. Assign roles to your team.
-
We watch
Continuous monitoring of every room, probe and contact. Full history for incident audits.
-
We alert
When a value drifts out of range, the on-call person gets an automatic call. Press 1 to acknowledge.
Sectors
If you have a critical process, Aviot fits.
Same hardware everywhere. What changes is the setup: which probes, which thresholds, who to call and in what order.
Alerts
Four channels. One alert that always lands.
-
Call
Auto-voice that repeats until someone picks up.
-
SMS
Mobile message with the alarm detail.
-
Email
Notification with history, charts and a link.
-
App
iOS/Android push notification, one-touch ack.
FAQ
Frequently asked questions
How long does it take to install?
A qualified technician brings it online in 3-4 hours, depending on panel layout and probe count.
What happens during a power outage?
The board has an internal lithium battery and its own IoT link, so it keeps alerting even if both grid and router go down.
How many rooms can one unit monitor?
Up to 128 rooms per install, with any combination of probes (temperature, humidity, CO₂, NH₃, pressure, panel contacts).
How do I acknowledge an alarm?
When the automatic call rings, press 1 on the phone keypad to confirm you are on it.
What is the warranty?
3-year hardware warranty and continuous support from day one.
Does it work in my sector?
If you have a critical process to watch — farms, cold storage, factories, water treatment, greenhouses — Aviot fits. Same hardware, only the configuration changes.
Ready to stop worrying?
Tell us about your facility and we will quote you within 24 h.